FRANGIBOLT PRODUCTS Actuator FC6-32-7SR2 Actuator FC4-24-10SR2 Actuator FC3-20-16SR2 Actuator FC2-16-31SR2 Frangibolt Washers Frangibolt Fasteners Frangibolt Lock Nuts Compression Fixture Frangibolt Switch-Washer Frangibolt Enclosures Frangibolt Application Examples	Frangibolt® Actuator FC2-16-31SR2 The model FC2-16-31SR2 is the smallest Frangibolt actuator produced by TiNi Aerospace. It is designed to operate with any standard high strength #8 size bolt or stud1. The small envelope and minimal power consumption (25 Watts @ 28 Vdc) make's it ideal for applications with stringent size and power requirements. The model FC2-16-31SR2 is also the fastest Frangibolt actuator capable of operating in less than 10 seconds. As with all other Frangibolt Actuators, the FC2-16-31SR2 is designed to have a high fatigue life and is easily reset using TiNi's portable compression tool FBT-CT2. 1 TiNi Aerospace must provide the specially notched Titanium fastener. This is largely application-dependent and is readily manufactured to customer specification. See Frangibolt Fastener Specification Sheet.   Function Time 2 (@ 23º C) Specifications Max Load Support & Release 2200 N (500 lb-f) Max Joint Length 4.4 cm (1.75 in) Operational Voltage 22 to 36 Vdc   Minimum Operating Temp. -65 oC (-85  oF) Maximum Operating Temp.2 +80 oC (176 oF) Heater Resistance  31 Ohms   Mass 20 gm (0.71 oz) Power Consumption  25 Watts   @ 28 Vdc Life Cycles  60 Cycles Min.   Features:  Redundant Heater   Reusable   TC Sensor
		2 Note that the function times shown above are for the higher transition temperature "FC" series Frangibolt Actuators which actuate at roughly 100°C. TiNi Aerospace also manufactures a line of "FB" series Frangibolt actuators which have a lower +75°C actuation temperature and therefore have a ~25% faster function time. Selection between the two should be based on maximum operating temperature.

(Adobe Acrobat required)

Website design by Hypersphere
©2001 TiNi Aerospace, Inc.